Uvex Superhelix Helmet

The Superhelix Helmet is lightweight and economically priced considering the abundance of high end features including 17 ventilation openings and Bee Stop fabric mesh to protect against insects.

Purchase Uvex Superhelix Helmet

The Superhelix Helmet is lightweight and economically priced considering the abundance of high end features including 17 ventilation openings and Bee Stop fabric mesh to protect against insects.

Weight: 236g
Size: 52-57cm

Features:
Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings.

Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion.

Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet.

Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap.

Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets.

Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Purchase Uvex Superhelix Helmet

Other products in the category Clothing / Helmets / Uvex Helmets:

Uvex Sport Boss Helmet -- The Sport Boss features the exclusive IAS adjustment system and a monomatic closure which makes for a perfect fit every time. If your helmet loosens up on the ride there's no need to stop and fiddle with the straps, just reach up and click the monomatic mechanisim in to microadjust on the fly. In-Mould technology means a tough helmet with superior protection for the back of the head. Weight: 285g Size: 54-60cm Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex Compass Helmet -- The Compass features the Uvex exclusive IAS adjustment system and a monomatic closure which makes for a perfect fit every time. If your helmet loosens up on the ride there's no need to stop and fiddle with the straps, just reach up and click the monomatic mechanisim in to microadjust on the fly. In-Mould technology means a tough helmet with superior protection for the back of the head. Weight: 310g Features: 16 vents Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex Magnum Helmet -- The Magnum has 18 vents including forward venting to direct cooling air toward the rider's temples. The inmold process used to make this helmet allows Uvex to incorporate large vents and mold in Bee Stop mesh. Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex Sport Boss Race Helmet -- This super light Sport Boss Race features the Uvex exclusive IAS and a monomatic closure which makes for a perfect fit every time. If your helmet loosens up after you get going there's no need to stop and fiddle with straps, just reach up and click the monomatic mechanism in to micro-adjust on the fly. In-Mould technology means a tough helmet with superior protection for the back of the head. weight with cross shield: 255g One size - 54-60cm

Uvex Supersonic GT Helmet -- The Supersonic GT is equipped with 2 air vents positioned to the outside of the helmet beneath the visor designed to increase airflow over the forehead and temples. Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex Supersonic RS Helmet -- The Supersonic RS is equipped with 2 air vents positioned to the outside of the helmet beneath the visor designed to increase airflow over the forehead and temples. Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex Wing RS Helmet -- The Wing RS is lightweight (275g or 295g depending on shell size), and extremely well ventilated with 22 openings in the shell. The double inmold process used to make this helmet allows uvex to incorporate large vents so it has molded in Bee Stop mesh. Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin.

Uvex XP100 Helmet -- The XP100 has 16 vents and a bit of style to the design that sets it and you apart form the crowd. the one size design fits 55-60cm. Features: Bee Stop: Molded-in mesh in the large, forward vents that prevents bugs from impacting the scalp through the large ventilation openings. Individual Adapting System (IAS): With its ratcheting closure mechanism, and pivot points, the Uvex IAS 2-system provides a unique, three-dimensional, and micro-adjustable fit. The integrated strap system guide guarantees a good and tight fit. The IAS knob can be operated with one hand, while the helmet is on. The system also features a ventilated forehead with anti-allergic, washable cushion. Inmold and Double Inmold Technology: Where other helmets have their protective foam glued into the hard outer shell, in the uvex inmold process, the foam is injected into a mold that is "lined" with the Makrolon outer shell. As a result, the foam is bonded to the outer shell. The result is a much more stable helmet, which allows Uvex to increase the size of the ventilation openings. In a Double Inmold helmet, a lower microshell is added to the mold, providing optimum protection for the lower, back part of the helmet. Monomatic closure: Most helmets use a standard click-lock, and anyone who rides knows that the fit of the chin strap can change as you get moving and start to sweat. Until now, you had a choice: stop and fiddle with your straps, or ride with a loose strap. Makrolon: Makrolon is a high-tech thermoplastic Polycarbonate (PC) material developed by Messrs, Bayer. Uvex is using this material for the production of PC lenses for goggles and sportglasses, and the shells of inmold bike helmets. Uvex has solved that particular problem with a ratcheted design (similar to what you might find on a pair of bike shoes or in-line skates, only smaller). This allows you to fine-tune how tight the strap closes on the chin on the fly. The strap itself is a 16mm wide, non-fade, uv-resistant, light, smooth, and easy on the skin. 255g

Uvex X-Ride Helmet -- The X- Ride features the Uvex exclusive IAS and a monomatic closure which makes for a perfect fit every time and makes it simple to micro-adjust the fit on the fly. In-Mould technology means a tough helmet with superior protection for the back of the head. The 23 ventilation openings make for cool runnings and a fabric mesh insert protects against insects. This helmet is exclusively made in Germany. Two shell Sizes available 56-61cm 61-65cm