HED Jet 9 FR Wheels

$949.95 -- Jet Flamme Rouge wheels represent the finest clincher aero wheel technology Hed offers. The 6 set offers a 60mm deep rim section for more aero goodness.

Purchase HED Jet 9 FR Wheels

The aero section on Jet 9 FR wheels is molded from a stiffer and lighter 1K fabric, saving 54 g per rim. Flamme Rouge Sonic hubs are built to the same exacting tolerances as regular sonics, but reduce weight with a carbon hub shell and forged titanium ratchet ring. Abec5 bearings are used for durability and low rolling resistance. Ti skewers are lighter than stock steel ones. The Scandium alloyed rims on FR wheels are lighter, stronger, and stiffer than unalloyed models. Jets are tuned with HED's proprietary SCT (Stability Control Technology) - adding improved crosswind handling to their stellar ride and cornering characteristics. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium clincher rims Light weight FR 1K carbon aero section 18 front and 24 rear silver bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Ratchet ring Titanium Skewer, Rim Tape and valve extender included Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 895 - Rear: 1074 Width: 23mm Depth 90mm

Purchase HED Jet 9 FR Wheels

Other products in the category Wheels / HED Wheels:

HED H3 Wheels -- The H3 has propelled more Grand Tour riders to the podium than any other wheel. Why? It is not a secret. The H3 is the ultimate in all wind conditions. Whether it is a headwind, crosswind, or tailwind, the H3 is fast. Other wheels (even Hed's own) are certainly speedy, but all other wheels have a specific wind range where they excel. The H3 offers speed no matter where the wind is. The pros know this, and many count on the H3 as their no compromise TT wheel choice. H3 wheels offer full on aero performance in any conditions. The key to the wide range of performance is the combination of a 55mm deep rim section, the airfoil section spokes and the smooth transitions between the two. The 55mm deep rim keeps drag low at shallow yaw angles. When the yaw angle goes past 15° the aero spokes work to keep the wheel from stalling, and drag stays flat. The optimum wind angle for the H3 is an amazing. Specifications: Alloy Clincher or Full carbon Tubular 19mm rim width profile Fits the narrowest bike frames Fastest wheel option for non disc wheel races Titanium Skewer and Ratchet ring included Rider weight limit 250lbs Available in 700c or 650c Tubular Weights (g): Front: 745 - Rear: 820 Width: 19mm Depth 54mm Clincher Weights (g): Front: 830 - Rear: 1020 Width: 19mm Depth 54mm

HED H3D Wheels -- The H3D is built by applying Hed's Jet 9 aero rim section to the standard H3. Why ride the H3D vs. the standard H3? There are two particular scenarios where the H3D has an advantage over the H3. 1. Used as a front wheel the H3D is faster than the H3 out to 10 degrees of wind yaw angle. Generally this means that 25mph and faster riders will get a benefit from the H3D because at these speeds yaw angles are generally low. At higher yaw angles the H3 is a faster wheel which is why for the majority of triathletes where speeds are 25mph and less the H3 still tends to have an advantage. 2. When used as a rear wheel the H3D has been proven to faster than any other rear wheel besides a disc. This has been proven over the course of many full bike and rider tests. This makes the rear H3D the ideal choice for events where disc wheels are not allowed or if you that prefer the ride and lighter feel of non disc wheels. It is believed that the blades of the H3 actually help to correct yaw angle winds in the rear of the bike and thus show results that are better than their wheel alone data. The H3D has been ridden to countless victories including the 2008 Beijing Olympics, Tour de France, Giro d'Italia, World Championships, numerous national TT championships, multiple Ironman races, multiple half Ironman races, and a complete domination on the track at the Six Day races. Specifications: Alloy Clincher or Full carbon Tubular 19mm rim width profile Fits the narrowest bike frames Fastest wheel option for non disc wheel races Titanium Skewer and Ratchet ring included Rider weight limit 250lbs Available in 700c or 650c Tubular: Weights (g): Front: 930 - Rear: 1100 Width: 19mm Depth 90mm Clincher: Weights (g): Front: 990 - Rear: 1165 Width: 19mm Depth 90mm

HED Ardennes GP Wheels -- Ardennnes GP wheels offer C2 speed and ride performance combined with "install it" and "forget it" durability. With very competitive weight and amazing C2 ride, the Ardennes GP outperforms more expensive hoops. The Hed Ardennes have lower rolling resistance and better aerodynamics than traditional 19mm wide rims. A 23mm tire has room to spread out on the 23mm wide rim. The reshaped tire carcass has a shorter, wider contact patch; as the tire rolls, a shorter section of the sidewall deflects. Less sidewall deflection lowers rolling resistance and increases efficiency. The same reshaping matches the tire spread to the rim width. Instead of looking like a lightbulb, the tire/rim profile is an ellipse - much more aero. The resulting road contact patch is bigger, so cornering grip is improved. On the C2 the tire profile is wider and the sidewall is shorter, so the carcass is stiffer and rolling resistance is lower. Specifications: C2 Alloy rims 18 front and 24 rear Black round spokes Skewer and Rim Tape included Clincher Rider weight limit 210lbs Weights (g): Front: 710 - Rear: 892 Width: 23mm Depth 25mm

HED Ardennes CL Wheels -- Sharing all the same advantages as the Ardennes FR, the Ardennes CL is a more suitable for ultimate longevity, larger riders, and/or Cyclocross. With its classic look and ride, the CL is a favorite everyday wheel for the professionals Hed works with. The Hed Ardennes have lower rolling resistance and better aerodynamics than traditional 19mm wide rims. A 23mm tire has room to spread out on the 23mm wide rim. The reshaped tire carcass has a shorter, wider contact patch; as the tire rolls, a shorter section of the sidewall deflects. Less sidewall deflection lowers rolling resistance and increases efficiency. The same reshaping matches the tire spread to the rim width. Instead of looking like a lightbulb, the tire/rim profile is an ellipse - much more aero. The resulting road contact patch is bigger, so cornering grip is improved. On the C2 the tire profile is wider and the sidewall is shorter, so the carcass is stiffer and rolling resistance is lower. Specifications: C2 Alloy rims 24 front and 28 rear Black bladed spoke Two cross spoke pattern Sonic flanged Hubs Skewer and Rim Tape included Clincher or Alloy Tubular Rider weight limit 225lbs Weights (g): Front: 732 - Rear: 910 Width: 23mm Depth 25mm

HED Ardennes LT Wheels -- Nearly identical to the Ardennes SL, the LT switches the scandium C2 rim for a more economical aluminum one. Despite fitting into the middle of our Ardennes line up, Hed believes this wheel still stacks up to any competitors' best offerings. The Hed Ardennes have lower rolling resistance and better aerodynamics than traditional 19mm wide rims. A 23mm tire has room to spread out on the 23mm wide rim. The reshaped tire carcass has a shorter, wider contact patch; as the tire rolls, a shorter section of the sidewall deflects. Less sidewall deflection lowers rolling resistance and increases efficiency. The same reshaping matches the tire spread to the rim width. Instead of looking like a lightbulb, the tire/rim profile is an ellipse - much more aero. The resulting road contact patch is bigger, so cornering grip is improved. On the C2 the tire profile is wider and the sidewall is shorter, so the carcass is stiffer and rolling resistance is lower. Specifications: C2 Alloy rims 18 front and 24 rear Black bladed spokes Carbon FR Sonic Front hub Skewer and Rim Tape included Clincher or Alloy Tubular Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 682 - Rear: 835 Width: 23mm Depth 25mm

HED Ardennes SL Wheels -- Ardennes SL is Hed's best selling wheelset It uses a carbon front hub and a new rear wheel lacing pattern to enhance power transmission and lateral stiffness. The SL utilizes the same scandium C2 rim as the Ardennes FR. The Scandium alloyed rims are lighter, stronger, and stiffer than unalloyed models. The Hed Ardennes have lower rolling resistance and better aerodynamics than traditional 19mm wide rims. A 23mm tire has room to spread out on the 23mm wide rim. The reshaped tire carcass has a shorter, wider contact patch; as the tire rolls, a shorter section of the sidewall deflects. Less sidewall deflection lowers rolling resistance and increases efficiency. The same reshaping matches the tire spread to the rim width. Instead of looking like a lightbulb, the tire/rim profile is an ellipse - much more aero. The resulting road contact patch is bigger, so cornering grip is improved. On the C2 the tire profile is wider and the sidewall is shorter, so the carcass is stiffer and rolling resistance is lower. Specifications: C2 Scandium rims 18 front and 24 rear Black bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic Front hub Skewer and Rim Tape included Clincher Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 632 - Rear: 817 Width: 23mm Depth 25mm

HED Jet 4 FR Wheels -- Jet Flamme Rouge wheels represent the finest clincher aero wheel technology Hed offers. They feature 1K carbon aero sections (saving 30g per rim), scandium C2 outer rim, titanium skewer, hub hardware, new rear wheel lacing pattern, and a new grease port rear hub. Stability Control Technology is also applied to their aero shapes providing sure footed handling in crosswinds. Ride like a pro, go Flamme Rouge. Jets are tuned with HED's proprietary SCT (Stability Control Technology) - adding improved crosswind handling to their stellar ride and cornering characteristics. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium clincher rims Light weight FR 1K carbon aero section 18 front and 24 rear silver bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Ratchet ring Titanium Skewer, Rim Tape and valve extender included Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 723 - Rear: 920 Width: 23mm Depth 45mm

HED Jet 5 Express Wheels -- Jet 5 Express Wheels combine state of the art technology with a heritage of excellence built in. The product of 25 years of wheel making expertise, the Jet 5 Express wheel set has formed a new class of wheel. Built with today's most advanced wheel technologies and the Hed tradition of building solid, dependable, aero wheels, and a price riders can afford. Cutting-edge features such as Hed's light weight unidirectional carbon aero sections, ground breaking C2 rims, and sonic hubs, the Jet 5 Express is the high-performance wheel you've been waiting for. To view Wheels Decal Options click on "View Enlarged Image" link below main image. Specifications: C2 clincher rims Light weight FR 1K carbon aero section Skewer, Rim Tape and valve extender included Rider weight limit 190lbs Sold in Pairs only. Weights (g): Front: 754 - Rear: 927 Width: 23mm Depth 55mm

HED Jet 6 FR Wheels -- The aero section on Jet 6 FR wheels is molded from a stiffer and lighter 1K fabric, saving 42 g per rim. Flamme Rouge Sonic hubs are built to the same exacting tolerances as regular sonics, but reduce weight with a carbon hub shell and forged titanium ratchet ring. Abec5 bearings are used for durability and low rolling resistance. Ti skewers are lighter than stock steel ones. The Scandium alloyed rims on FR wheels are lighter, stronger, and stiffer than unalloyed models. Jets are tuned with HED's proprietary SCT (Stability Control Technology) - adding improved crosswind handling to their stellar ride and cornering characteristics. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium clincher rims Light weight FR 1K carbon aero section 18 front and 24 rear silver bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Ratchet ring Titanium Skewer, Rim Tape and valve extender included Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 724 - Rear: 936 Width: 23mm Depth 60mm

HED Jet 9 FR Wheels -- The aero section on Jet 9 FR wheels is molded from a stiffer and lighter 1K fabric, saving 54 g per rim. Flamme Rouge Sonic hubs are built to the same exacting tolerances as regular sonics, but reduce weight with a carbon hub shell and forged titanium ratchet ring. Abec5 bearings are used for durability and low rolling resistance. Ti skewers are lighter than stock steel ones. The Scandium alloyed rims on FR wheels are lighter, stronger, and stiffer than unalloyed models. Jets are tuned with HED's proprietary SCT (Stability Control Technology) - adding improved crosswind handling to their stellar ride and cornering characteristics. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium clincher rims Light weight FR 1K carbon aero section 18 front and 24 rear silver bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Ratchet ring Titanium Skewer, Rim Tape and valve extender included Rider weight limit 190lbs Stallion build available for riders 191-225lbs Weights (g): Front: 895 - Rear: 1074 Width: 23mm Depth 90mm

HED Jet Disc Wheel -- Jet discs are a hybrid wheel, built with spokes for strength and durability. When the substrate wheel is completed, trued, and stress relieved, disc sides are bonded to the hub rim and spokes. With a two part building process, the disc sides can be made lighter and shaped more readily, without losing any strength. The new disc incorporates a toroidal bulge near the rim and a radius on the large transition leading from the hub to the bulge. These shapes make the Disc Jet not only faster than the Standard disc, they make it faster than any other disc. Pure speed - it will never get old. Disc Jet. Stiff, light, fast. C2 rim for decreased rolling resistance. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium platform Light weight FR 1K carbon aero section Skewer, rim tape and valve extender included Clincher or Alloy Tubular Rider weight limit 190lbs Stallion build available for riders 191-225lbs Tubular Weights (g):Rear: 1175 Width: 23mm Clincher Weights (g):Rear: 1175 Width: 23mm

HED Jet Disc FR Wheel -- Jet discs are a hybrid wheel, built with spokes for strength and durability. When the substrate wheel is completed, trued, and stress relieved, disc sides are bonded to the hub rim and spokes. With a two part building process, the disc sides can be made lighter and shaped more readily, without losing any strength. The new disc incorporates a toroidal bulge near the rim and a radius on the large transition leading from the hub to the bulge. These shapes make the Disc Jet not only faster than the Standard disc, they make it faster than any other disc. Pure speed - it will never get old. Disc Jet. Stiff, light, fast. C2 rim for decreased rolling resistance. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 Scandium platform Flamme Rouge Ceramic Bearings Light weight FR 1K carbon aero section Skewer, rim tape and valve extender included Clincher or Alloy Tubular Rider weight limit 190lbs Stallion build available for riders 191-225lbs Tubular Weights (g):Rear: 1175 Width: 23mm Clincher Weights (g):Rear: 1175 Width: 23mm

HED Stinger 3 FR Wheels -- The Stinger 3 FR is Hed's climber supreme - A wheel that literally climbs on its own. Extremely aerodynamic and lightweight with a reactive stiffness and build, the S3 will carry you up the climb when your legs simply do not want to. A highly requested wheel from the Pro Tour teams Hed works with. Since the introduction of the C2 platform, HED. has spent two full years developing SCT, our proprietary rim profile tuning process. Each rim depth is shaped for lowest aero drag and fine-tuned to maximize stability in crosswinds. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): Front: 515 - Rear: 673 Width: 26mm Depth 36mm

HED Stinger 4 FR Wheels -- Hed's Stinger 4 FR is a superb road wheel. The introduction of the 23mm wide C2 platform was a dramatic improvement over our previous designs: aero drag was reduced substantially, and the use of wider tires dramatically improved cornering. Since the introduction of the C2 platform, HED. has spent two full years developing SCT, our proprietary rim profile tuning process. Each rim depth is shaped for lowest aero drag and fine-tuned to maximize stability in crosswinds. The Stinger 4 FR combines C2 cornering performance and TT speed in a 1294g 46mm wheelset. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): Front: 608 - Rear: 773 Width: 26mm Depth 46mm

HED Stinger 5 FR Wheels -- The Stinger 5 FR is a 50mm deep rim wheel built for cobbles and cyclo-cross races. These wheels are built with an extra layer of carbon fiber to give you a more comfortable ride on rough roads. The rim bed has been raised to accommodate 25mm or wider tires, perfect for the larger cyclo-cross tires. The C2 tire well secures the tire in a wider and slightly deeper "cradle". With increased support of the tire carcass, sidewall flexion is reduced, and less flexion vastly increases cornering stability, tire efficiency and general handling. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): Front: 680 - Rear: 865 Width: 26mm Depth 50mm

HED Stinger 6 FR Wheels -- The Stinger 6 FR is excellent for TT use. It has been updated and revised with the C2 platform and SCT which is Hed's proprietary rim profile tuning process. Each rim depth is shaped for lowest aero drag and fine-tuned to maximize stability in crosswinds. That means Stinger 6 FR's go faster in a wider range of wind conditions than ever before. When side winds kick up, your wheels will still go fast, and they will handle very well. The new shape is such an improvement that the 60mm deep Stinger 6 handles more like a 45mm deep wheel in a crosswind. The C2 tire well secures the tire in a wider and slightly deeper "cradle". With increased support of the tire carcass, sidewall flexion is reduced, and less flexion vastly increases cornering stability, tire efficiency and general handling. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): 658 - Rear: 823 Width: 28mm Depth 60mm

HED Stinger 7 FR Wheels -- After suggestions from their pro teams for a deeper and stiffer wheel for road racing Hed developed the Stinger 7. This is the deepest wheel they recommend for road racing. The Stinger 7 is ideal for the sprinter - it's super stiff! The sidewalls are reinforced to provide that stiffness without compromising the overall weight of the wheel. The reinforced side walls help eliminate flex in a corner or when you are going all out towards the line. Triathletes will also benefit for the deeper more aero faring. The 7's will provide increased aerodynamics but not compromise handling at all. The deeper section will help on the long stretches of roads triathletes face but not move when faced with a crosswind. The C2 tire well secures the tire in a wider and slightly deeper "cradle". With increased support of the tire carcass, sidewall flexion is reduced, and less flexion vastly increases cornering stability, tire efficiency and general handling. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): Front: 745 - Rear: 881 Width: 28mm Depth 70mm

HED Stinger 9 FR Wheels -- The Stinger 9 FR rim shape not only lowers drag at all angles but also gives the rim a bigger window of aerodynamic effectiveness. As with the Stinger 6, Steve Hed has again proven that shape is actually more important than depth as the Stinger 9 FR not only outperforms every spoked wheel shallower than 90mm but it also outperforms all the wheels that deeper than 90mm. During development of the new shape Hed also set out to increase lateral stiffness, cornering performance, and impact durability. This was done without affecting the impressively comfortable ride quality. Hed focused considerable energy on the type of carbon used to make the rim as well as the orientation of the fibers. Balancing lateral stiffness, vertical compliance, impact resistance, cornering performance is quite a dance. The result of SCT Tuning efforts is that the Stinger 9 uses three different types of carbon and a unique layup schedule that produces a wheel that is 15% stiffer laterally and 10% more impact resistant. This was done while maintaining vertical compliance and making the rim 25 grams lighter. Cornering is noticably improved by the use of our C2 tire well. The C2 tire well secures the tire in a wider and slightly deeper "cradle". With increased support of the tire carcass, sidewall flexion is reduced, and less flexion vastly increases cornering stability, tire efficiency and general handling. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform tubular rims 18 front and 24 rear silver bladed spokes Sapim CX-Ray bladed spokes Carbon FR Sonic hubs Rear hub grease port with carbon port cap Titanium Skewer and valve extender included Titanium Ratchet ring Rider weight limit 210lbs - Stinger wheels are designed for 23mm tires. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g): Front: 807 - Rear: 885 Width: 28mm Depth 90mm

HED Stinger Disc Wheel -- The Stinger disc is all about unrivaled performance. It is the product of 25 years of wind tunnel development. Its unique shaping delivers the aerodynamics component while the construction technique delivers maximum lateral stiffness. This combination makes for a real world disc that is simply unbeatable. Proof of this is evident in the fact that four Pro tour level teams have been winning grand tour stages and national titles on them. Stability Control Technology for best performance in all wind conditions and the Stinger rim substrate makes the Stinger disc even lighter and stiffer. The Stinger tire to rim interface is more aero than the Jet version, so the Stinger Disc is even faster. To view wheel decal color options click on "View Enlarged Image" link below main image. Specifications: C2 platform Tubular rim Full carbon rim Light weight FR 1K carbon aero section Ti Skewer and valve extender included Rider weight limit 225lbs - Stinger wheels are designed for 23mm tires. Aerodynamically this is the fastest setup we found. - The C2 tire well is most impact resistant with 22mm or larger tires. - Using a tire less than 22mm will void the warranty - Riders 180 - 210 lbs should run 24mm or larger tires. - Minimum tire pressure for Stingers is 120 psi, max 135. Weights (g):Rear: 1195 Width: 28mm