Fulcrum Racing 7 Wheels

Racing 7 utilizes a 24 mm profile, oversize hubs and ground-finished braking surfaces. - Racing Red or Cool Black!

Racing 7 utilizes a 24 mm profile, oversize hubs and ground-finished braking surfaces.

The anodized black or red aluminum rim presents a ground-finished braking surface for better brake pad adherence, making the latter more powerful in both dry and rainy conditions.

The 20 aero spokes on the front wheel and the 24 on the rear are in 2mm-gauge stainless steel for maximum strength. The rear wheel features double spoking on the right side. This means that for each spoke on the left side there are two spokes on the right. The result is a torsionally stiff wheel. The two spokes diametrically opposed to the joint are oversized to achieve a balanced wheel. The aluminum hubs feature sealed hi-precision bearings for maximum smoothness of rotation.

1910g Front & Rear

The Fulcrum Wheels project originates from the revolutionary ideas of a group of young aerospace engineers sharing a heartfelt passion for bicycles.

After analyzing the products offered by the market, realized that there was ample room for improvement. They decided to apply their knowledge of aeronautics to design a new range of specialized wheels. In short order the project was transformed into a prototype model that gave excellent results when tested--results well above those of rival products.

Fulcrum Wheels, the new benchmark for wheels.

Purchase Fulcrum Racing 7 Wheels

Other products in the category Hot Deals:

Campagnolo Centaur Ultra Torque Carbon Crankset -- This year the Centaur groupset presents an optional carbon-fiber crankset. The Centaur Ultra Torque Carbon crankset was designed by applying the same constructive technology as for the Record Carbon and Chorus Carbon series. This involves a careful union of two technologies, namely Multidirectional Carbon Fiber and Unidirectional Carbon Fiber technologies. In this solution the Multidirectional Carbon Fiber is first spread, creating the component’s overall strength, after which the Unidirectional Carbon Fiber is applied, following the same direction as the stress lines, i.e. all the points where the component is subjected to maximum stress. In this way a component of unbelievable mechanical strength is obtained. When comparing the results with the same model in aluminium, the differences are extraordinary: - Greater lightness - Greater resistance to static loads - Greater fatigue strength - Greater torsional strength

Carrera Estremo Frameset -- The new Estremo and Estremo Light models represent the cutting edge of Carrera's well known technology. These models utilize a new "LAMINATED CARBON" process. The carbon tubes for Estremo are precisely mitered and fastened with special aerospace resins and then laminated with layers of carbon at precise angles in order to guarantee lightness, comfort and rigidity. The layering by hand of different strips onto the joints also allows for complete customized frames built on size by personalized measurements. The Carrrera quality and experience in this technology is unrivalled and takes the Estremo to the pinnacle of the world's finest bicycles. The Estremo model is offered in 6 stock sizes and is available custom on size. The frameset features replaceable rear drop outs and integrated headset and the ultralight Pegaso 1 1/8" full carbon fork. Estremo frame weighs 1130 grams and the Estremo Light model weighs an astounding 925 grams. The Estremo Light model uses carbon drop-outs and the Pegaso Light fork at 320 grams. Sizing Chart Reads left to right: size, seat tube center to end, seat tube center to center, top tube, seat angle. XS--48.5--43.5--52.3--74.5 S---51----46----53.7--74 M---54----49----55.5--73.5 L---56----51----56.5--73.3 XL--58----53----57.7--73 XXL-61----56----59----73

Isaac Pascal Frameset -- The Pascal employs Toryca T300J Carbon Filament and has a dedicated Issac carbon fork. The frame is equipped with an integrated cartridge bearing headset and the the Isaac 27.2mm seatpost. Coming in at 1370grams for a 54cm frame the Pascal delivers an incredibly high level of performance for the price. It is hand laid like all Isaacs and allows the rider to full advantage of carbon's road capabilities. Pascal full carbon Basic Geometry (Road, micro slope) Size toptube seat tube angle 49 525 mm 74.5 52 531 mm 74 54 540 mm 73.8 56 550 mm 73.5 58 560 mm 73.5 60 569 mm 73.5

Wipperman Connex 10S0 Shimano 10 speed Chain -- 6.05 mm wide, for compatibility with Shimano 10-speed drivetrains. The reuseable connex 10-speed link means you won't need special tools to install or disasemble this chain either -just your hands. The 10S0 has a silver nickel finish that is very durable and distinctive. The Connex chain line is the choice recommended by Mavic, Orbea and Eddy Merckx for complete compatibility and smooth riding.