Carrera Crono Carbon Frameset

$4994.95 -- Carrera's "laminated carbon" technology is employed in the Carbon Crono so that each frame is built to measure on a customized basis so the rider can achieve their best possible results.

Purchase Carrera Crono Carbon Frameset

The Carbon Crono frame is constructed with Carrera's "laminated carbon" technology so that each frame can be custom made to suit the individual rider. The Carbon Crono conforms to the requisites demanded by UCI standards. The aerodynamic shape of the frame is specifically designed for a high co-efficient of aerodynamic penetration with minimal drag while maintaining extraordinary stiffness through the bottom bracket area for the most efficient torque transfer possible. Technical Features of the Carbon Crono are: -Italian tubes manufactured in composite materials at Carrera's research and development facility. -Custom design and hand assembled with Carrera "laminated carbon" technology. -The carbon fiber tubing is manufactured in a high pressure autoclave to obtain a structure equivalent to a monocoque style in terms of stiffness. A carbon-titanium weft and vectran is used in the parts most stressed. -Kevlar reinforcements are used at braze on points for bottle cages and cable stops. -Up to 32 dimensional checks are carried out during the construction of each Carbon Crono. -Each Carbon Crono is hand painted and may be done in any style from the Carrera catalog or variations on their themes. -The Carbon Crono frameset includes an aerodynamic full carbon fork with straight wing blades. The Carbon is only available as a custom frame, but as a guideline sizing for the Carbon Crono reads left to right for center to center, top tube and seat tube angle. 46---52---76.0 48---54---76.0 50---55---75.5 52---56---75.5 54---57---75.0

Purchase Carrera Crono Carbon Frameset

Other products in the category All Frames / Frames / Carrera Frames:

Carrera Erakle Frameset -- Advanced production procedures gained through years of study and continual improvement, united with an adventurous research tradition sustained by targeted investments, have guided the Podium Research and Development department to the creation of the Erakle. The Erakle is conceptually innovative both in its form and its construction elements. The characteristic shapes of geometrically variable oversize tubing, rational use of rectangular sections, massively oversized housing of the bottom bracket, shaped rear stays and aerodynamically shaped integrated seatpost, unite perfectly with the material used: stratified HM (High Modulus) carbon fibre, diversified and oriented on the basis of the computerised analysis of acting and reacting forces that stress different areas of the frame. The determined lines and the aerodynamic profile of the Erakle are preserved by the complete absence of external cables, which run throughout the tubing in a polytetrafluoroethylene (PTFE) casing. This plastic polymer is not only capable of reducing the friction factor, but also it has a high resistance against the action of external agents, remaining chemically inert over time. By achieving a perfect symbiosis between shape and substance, the Erakle has an elevated structural efficiency and an aggressive aesthetic expression unequalled in the world of road bikes. Technical characteristics: . Fork TK 1 Carbon 60HM finish 1K 1-1/8" - 1,5". . Material carbon Pre-Preg T-700SC HM50 T - HS40 - HS60 T 1K. . Assembly System Laminated carbon vacuum formed. . Integrated Headset System 1-1/8" - 1,5". . Bottom Bracket BSA o ITA . . Rear Dropouts Carbon integrated Chainstay. . Frame weight 1130gr. size M. . Internal cabling. Sizing Chart Reads left to right: size, top tube, seat angle, head tube length. XS--52.3--74.5--130 S---53.7--74.0--140 M---55.5--73.5--160 L---56.5--73.5--180 XL--57.7--73.0--195 XXL-59.0--72.7--220

Carrera Erakle TS Frameset -- The Erakle TS is a very light but stiff bike, just like its bigger brother the Erakle. Cyclists all over the world appreciate it for the aesthetic beauty of its unabashed shapes and the certainty of the best possible performances that derives from the relation between its modern design. The Erakle TS is a monocoque construction frame, but it delivers a very compliant, sophisticated, and highly response. All together the Erakle TS is a precise synthesis of comfort, quality and speed. Technical characteristics: . Fork/TK1 Carbon 60HM finish 1K 1-1/8" - 1,5". . Material/carbon Pre-Preg T-700sC HM50 T - Hs40 - Hs60 T 1K. . Monocoque Carbon Weave 1K. . Integrated Headset system 1-1/8" - 1,5". . B. Bracket/Bsa. . rear dropouts/Carbon integrated Chainstay. . Frame weight/1150gr. size M. . Internal cabling. . ready for electronic systems. Sizing Chart Reads left to right: size, top tube, seat angle, head tube length. XS--52.3--74.5--130 S---53.7--74.0--135 M---55.5--73.7--155 L---56.5--73.5--175

Carrera Phibra Frameset -- The structure of the Phibra is created using the innovative technique of a laminated "2b" double arc block that combines the performances of a monocoque frame (stiffness, light weight, comfort, long life, reliability) with the possibility of customizing the frame according to the rider's measurements. The fully internal Teflon cables that run through the frame tubing are specifically designed to reduce friction while enhancing the aesthetic level of the finish. Technical characteristics . Fork: Thunder monocoque carbon 60HM 1K 1-1/8" - 1,5" weight gr. 390. . Material carbon Pre-Preg T-700SC HM50 T - HS40 - HS60 T 1K. . Assembly System 2B - Double Arc Block Technology. . Bottom Bracket BSA or ITA . Frame weight 1360gr. size M. . Internal cabling in PTFE. Sizing Chart Reads left to right: size, seat tube center to center, top tube, seat angle, head tube length. XS--52.3--75.0--125 S---53.7--74.5--140 M---55.5--74.0--160 L---56.5--73.7--180 XL--57.7--73.5--200

Carrera Phibra Two Frameset -- The Phibra Two is a full monocoque version of the Phibra incorporating the unique double arc block of the customizable Phibra. The Two fully realizes the performance advantages of a monocoque frame (stiffness, light weight, comfort, long life, reliability). The fully internal Teflon cables that run through the frame tubing are specifically designed to reduce friction while enhancing the aesthetic level of the finish. Technical characteristics . Fork Thunder carbon monocoque 1-1/8" - 1,5" weight gr. 390. . Material Carbon Pre-Preg HS T700SC HM IM600 SHM HR 40 50T 1K. . Assembly System Monocoque carbon Weave 1K. . Integrated Headset System 1-1/8" - 1,5". . Botton Bracket BSA. . Frame weight gr. 1360 size frame M. . Internal cabling. Sizing Chart Reads left to right: size, seat tube center to center, top tube, seat angle, head tube length. XS--52.3--75.0--125 S---53.7--74.5--140 M---55.5--74.0--165 L---56.5--73.7--185

Carrera Ilos Frameset -- The Ilos is full of 950 grams of technology (950g in medium size). Carrera's precise studies of the tubes sections, their behavior in the parts of most stress and the insertion of special fibres, have allowed them to create a frame with minimal dia-meters with regard to thickness and weight while keeping intact the characteristics of extreme resistance for a smooth, fast ride. Each frame is carried out as one-piece thank to the use of special moulds. The use of very high quality materials and the "solid carbon" technology makes Ilos a frame for high performance and total vibration absence. Frame construction features: UD carbon and carbon/titanium weft, vectran in the parts most stressed. Kevlar reinforcements at the braze on points for cables and hangers. Monocoque with vertical tube that integrates the seat post provided, on demand, with a carrera-podium r&d patented lock. Minimal dimensions for the exclusive tubes design Frame with a lightly sloping design produced on carrera-podium r&d exclusive specifications 1" 1/8 integrated headset Hand painted Monocoque light fork (340 gr) Sizing Chart Reads left to right: size, seat tube center to end, seat tube center to center, top tube, seat angle, head tube length. XS--48.5--44.6--52----74.8--125 S---51.5--47.5--53.5--74.2--135 M---53.5--49.5--54.5--74.0--155 L---55.5--51.5--56.5--73.5--175 XL--57.5--53.5--57.5--73.5--195

Carrera Estremo Frameset -- The Estremo represents the cutting edge of Carrera's "LAMINATED CARBON" process. The carbon tubes for Estremo are precisely mitered and fastened with special aerospace resins and then laminated with layers of carbon at precise angles in order to guarantee lightness, comfort and rigidity. The layering by hand of different strips onto the joints also allows for complete customized frames built on size by personalized measurements. The Carrera quality and experience in this technology is unrivaled and takes the Estremo to the pinnacle of the world's finest bicycles. Technical characteristics: . Fork Vela carbon 60HM 3K / 1-1/8" - 1,5" weight gr. 330. . Material carbon Pre-Preg T-700SC HM40 J - T 300 3K. . Assembly System Laminated carbon vacuum formed. . Integrated Headset System 1-1/8" - 1,5". . Bottom Bracket ITA . Frame weight 1150gr. size M. Sizing Chart Reads left to right: size, seat tube center to end, seat tube center to center, top tube, seat angle. XS--48.5--43.5--52.3--74.5-130 S---51----46----53.7--74---140 M---54----49----55.5--73.5-160 L---56----51----56.5--73.3-180 XL--58----53----57.7--73---200 XXL-61----56----59----73---230

Carrera Veleno Frameset -- The Veleno is the next generation of Carbon technology from an Italian leader in the field. The Veleno takes advantage of new construction processes and build efficiency resulting in a frameset that delivers a supreme ride and is an amazing value. The front monocoque triangle is created directly in a press using 65% highly-resistant T700sc carbon fibre, 25% "High Modulus" M30J 3K carbon weave and 10% "High Strength" 60T carbon fibre. The frame build is completed with a bonded and laminated "Laminated Carbon" rear triangle. The resulting light & competitive frame with good torsional stiffness imparts immediate mechanical response thanks to a reduced deformation of the monococque, total absence of resonance throughout the frame at high speeds, and fantastic stability. Technical characteristics: * Tubing produced with materials derived from aero-space industries * Quality control and lab tests performed inside the Podium R&D department * Integrated 1" 1/8 headset * Pegaso carbon monocoque fork Sizing Chart Reads left to right: size, top tube, seat angle, and head tube length. XS---52.0--74.5--110 -S---52.5--75.0--115 -M---53.8--74.5--145 -L---55.6--73.5--160 XL---57.0--73.0--185

Carrera Nitro Frameset -- Nitro is a monocoque carbon frame produced with the superimposition of various types of carbon fiber and K12 finishing. Technical characteristics: * produced with "Solid Carbon" technology * fibres consolidation in high pressure autoclave with the "sack" technique * kevlar reinforcements in the parts most stressed to raise the mechanical resistance and to optimize thickness, stiffness and weight * full carbon Speedcarbon 1 1/8"fork Sizing Chart Reads left to right: size, seat tube center to end, seat tube center to center, top tube, seat angle. XS---47.0--41.5----51.5--74.5--110 -S---50.0--46.0----52.4--74.5--115 -M---53.0--49.0----53.8--74.5--145 -L---55.0--49.5----55.6--73.5--160 XL---58.0--53.0----57.0--73.0--195 2X---61.0--55.5----58.5--73.0--200

Carrera Ulisse RC Frameset -- Aerospace research does have some real beneficial results as in the case of the Ulisse RC. The aluminium alloy is worked in a thermic way with the "scandium". The changes at the molecular level are so important that it considerably raises its mechanical properties and obtains a performance level much higher than any other aluminum alloy. The Ulisse RC uses the rear carbon triangle which increases reactivity and stiffness. The main characteristics of the Ulisse RC are high stiffness in the main triangle for ultimatte performance with reduced weight and superior riding comfort thanks to the carbon front and rear forks. Technical characteristics: * rc2 carbon rear triangle planed by carrera-podium r&d department that exalt the reactivity * integrated headset * hand-finished and painted * full carbon atlantis fork * 1290 grams * custom geometry available, plus $200 Geometry is listed by seat tube length total and measured from the center of the bottom bracket to the center of the top tube at its intersection with the seat tube, top tube length, and seat tube angle, head tube length. XS---47.5---43.5---52.3---74.5--125 -S---49.0---45.0---52.8---74.0--135 -M---52.0---48.0---55.5---74.0--155 -L---55.0---51.0---56.5---73.5--175 XL---58.0---54.0---58.5---72.7--205

Carrera Prometeo RC Frameset -- The Prometeo RC has stunning new shapes of aluminum that accent the front triangle and is combined with the new design RC2 rear carbon for the ultimate in stiffness, comfort and lightweight. The aluminum used is 7005 triple butted heat treated. Technical characteristics: different triple thickness special tubes carried out on carrera-podium r&d design integrated headset hand finished and painted 1350 grams custom geometry available, plus $200 full carbon Atlantis fork Geometry is listed by seat tube length total and measured from the center of the bottom bracket to the center of the top tube at its intersection with the seat tube, top tube length, and seat tube angle, head tube. XS---47.5---43.5---52.3---74.5--125 -S---49.0---45.0---52.8---74.0--130 -M---52.0---48.0---55.5---74.0--150 -L---55.0---51.0---56.5---73.5--170 XL---58.0---54.0---58.5---72.7--205

Carrera Shield RC Frameset -- The world's finest steel frame is now using Deda EOM 16.5 steel tubing to further lighten the frame. The Shield is still built with lugs, has multi shaped steel tubes and carbon wishbone seatstays. This frame is the perfect blend of tradition and new technology. Shield is offered in four sloping sizes, has a full carbon fork and weighs 1450 grams. Sloping sizes and custom sizes are offered. Customization adds $200.00 Deda EOM 16.5 steel tubing with lugged construction and full carbon fork. 27.2 Seat Tube Diameter Geometry is listed by seat tube length total and measured from the center of the bottom bracket to the center of the top tube at its intersection with the seat tube, top tube length, and seat tube angle. XS---47.5---43.5---52.3---74.5 -S---49.0---45.0---52.8---74.0 -M---52.0---48.0---55.5---74.0 -L---55.0---51.0---56.5---73.5 XL---58.0---54.0---58.5---72.7

Carrera Lima Frameset -- Carrera still builds traditional lugged steel frames the old fashioned way; one at a time. Handling and balance are superior due to proven geometry and perfect frame alignment. Technical characteristics: * Double butted & lugged construction * 1" steel fork with sloping crown * frame weight, 4 lbs Geometry is listed by seat tube length (measured from the center of the bottom bracket to the center of the top tube at its intersection with the seat tube), top tube length, seat tube angle and head tube length. . 48---51.5---75.00--8.5 . 49---52.0---75.00--9.0 . 50---52.5---74.50--10.0 . 51---53.0---74.50--11.0 . 52---53.5---74.00--12.0 . 53---54.0---74.00--12.5 . 54---54.5---74.00--13.5 . 55---56.0---73.50--14.0 . 56---56.5---73.50--15.0 . 57---57.0---73.00--16.0 . 58---57.5---73.00--17.0 . 59---58.0---72.50--18.0 . 60---58.5---72.50--19.0

Carrera Crono Carbon Frameset -- The Carbon Crono frame is constructed with Carrera's "laminated carbon" technology so that each frame can be custom made to suit the individual rider. The Carbon Crono conforms to the requisites demanded by UCI standards. The aerodynamic shape of the frame is specifically designed for a high co-efficient of aerodynamic penetration with minimal drag while maintaining extraordinary stiffness through the bottom bracket area for the most efficient torque transfer possible. Technical Features of the Carbon Crono are: -Italian tubes manufactured in composite materials at Carrera's research and development facility. -Custom design and hand assembled with Carrera "laminated carbon" technology. -The carbon fiber tubing is manufactured in a high pressure autoclave to obtain a structure equivalent to a monocoque style in terms of stiffness. A carbon-titanium weft and vectran is used in the parts most stressed. -Kevlar reinforcements are used at braze on points for bottle cages and cable stops. -Up to 32 dimensional checks are carried out during the construction of each Carbon Crono. -Each Carbon Crono is hand painted and may be done in any style from the Carrera catalog or variations on their themes. -The Carbon Crono frameset includes an aerodynamic full carbon fork with straight wing blades. The Carbon is only available as a custom frame, but as a guideline sizing for the Carbon Crono reads left to right for center to center, top tube and seat tube angle. 46---52---76.0 48---54---76.0 50---55---75.5 52---56---75.5 54---57---75.0

Carrera Crono ALUX Frame -- The fully customizable Carrera Crono ALUX is constructed in 7075T6 aluminum alloy creating a frame that is light, responsive and stiff for excellent power transmission during time trial efforts. The Crono ALUX is available in standard Carrera TT geometry or in custom sizing. Customization adds $200.00. Technical characteristics for the Crono ALUX: -7075 T6 differential triple butted tubes designed at Carrera r&d in Italy. -An aerodynamic full carbon crono fork with straight wing blades and an integrated headset. -Hand finishing and painting. - 1530 grams Sizing reads left to right center to center, top tube and seat tube angle. XS---46.0---52.0---76.0 -S---47.0---52.5---76.0 -M---47.0---54.0---75.5 -L---49.5---56.0---75.5 XL---49.5---56.5---75.0